 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Technical Data Sheet 7343/B1C2-APSA/X/MS Features Popular T-1 3/4 package. High efficiency. General purpose leads. Selected minimum intensities. Available on tape and reel. The product itself will remain within RoHS compliant version. UV resistant epoxy Descriptions The series is specially designed for applications requiring higher brightness. The LED lamps are available with different colors, intensities, epoxy colors, etc. Applications Color Graphic Signs Message boards Variable message signs (VMS) Commercial outdoor advertising Device Selection Guide LED Part No. 7343/B1C2-APSB/MS 7343/B1C21-APSB/P/MS Chip Material InGaN Emitted Color Blue Lens Color Water clear Stopper No Yes Everlight Electronics Co., Ltd. Device Number : DLE-734-122 http\\:www.everlight.com Prepared date: 12-19-2006 Rev 1 Page: 1 of 7 Prepared by: Grace Shen Technical Data Sheet 7343/B1C2-APSA/X/MS Package Dimensions Stopper Type No Stopper Type Notes: Other dimensions are in millimeters, tolerance is 0.25mm except being specified. Protruded resin under flange is 1.5mm Max LED. Bare copper alloy is exposed at tie-bar portion after cutting. Everlight Electronics Co., Ltd. Device Number : DLE-734-122 http\\:www.everlight.com Prepared date: 12-19-2006 Rev 1 Page: 2 of 7 Prepared by: Grace Shen Technical Data Sheet 7343/B1C2-APSA/X/MS Absolute Maximum Rating (Ta=25) Parameter Forward Current Pulse Forward Current (Duty1/10@ 1KHz) Operating Temperature Storage Temperature Reverse Voltage Electrostatic Discharge Soldering Temperature Power Dissipation Notes: Soldering time5 seconds. Symbol IF IFP Topr Tstg VR ESD Tsol Pd Absolute Maximum Rating 30 100 -40 ~ +85 -40 ~ +100 5 1K 260 5 110 Unit mA mA V V mW Electro-Optical Characteristics (Ta=25) Parameter Radiometric Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Half width Forward Voltage Reverse Current Symbol IV 21/2 p d VF IR Min. 2850 ------465 ---2.8 ---Typ. 4500 15 468 470 35 3.2 ---Max. 7150 ------475 ---3.6 50 V uA VR=5V nm IF=20mA Unit mcd deg Condition Everlight Electronics Co., Ltd. Device Number : DLE-734-122 http\\:www.everlight.com Prepared date: 12-19-2006 Rev 1 Page: 3 of 7 Prepared by: Grace Shen Technical Data Sheet 7343/B1C2-APSA/X/MS Rank Combination (IF=20mA) Rank Luminous Intensity P 2850~3600 15% Q 3600~4500 R 4500~5650 S 5650~7150 Unit: :mcd *Measurement Uncertainty of Luminous Intensity: Rank Forward Voltage 0 2.8~3.0 1 3.0~3.2 0.1V 2 3.2~3.4 3 3.4~3.6 Unit:V *Measurement Uncertainty of Forward Voltage: Rank Dominant Wavelength 1 2 Unit:nm 465~470 470~475 *Measurement Uncertainty of Dominant Wavelength 1.0nm Everlight Electronics Co., Ltd. Device Number : DLE-734-122 http\\:www.everlight.com Prepared date: 12-19-2006 Rev 1 Page: 4 of 7 Prepared by: Grace Shen Technical Data Sheet 7343/B1C2-APSA/X/MS Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device Number : DLE-734-122 http\\:www.everlight.com Prepared date: 12-19-2006 Rev 1 Page: 5 of 7 Prepared by: Grace Shen Technical Data Sheet 7343/B1C2-APSA/X/MS Packing Quantity Specification 1.500PCS/1Bag5Bags/1Box 2.10Boxes/1Carton Label Form Specification CPN: Customer's Production Number EVERLIGHT CPN: P/N: 7343/B1C2-APSA/X/MS QTY CAT: LOT NO HUE: REF: RoHS P/N : Production Number QTY: Packing Quantity CAT: Ranks of Luminous and Forward Voltage HUE: Ranks of Dominant Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place MADE IN TAIWAN Everlight Electronics Co., Ltd. Device Number : DLE-734-122 http\\:www.everlight.com Prepared date: 12-19-2006 Rev 1 Page: 6 of 7 Prepared by: Grace Shen Technical Data Sheet 7343/B1C2-APSA/X/MS Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT's consent. 4. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering Temp. at tip of iron Soldering time Distance 400 Max. (30W Max.) 3 sec Max. 3mm Min.(From solder joint to case) Distance 3mm Min. Preheat temp. Bath temp. Bath time. DIP Soldering 100 Max. (60 sec Max.) 265 Max. 5 sec Max. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. Device Number : DLE-734-122 http\\:www.everlight.com Prepared date: 12-19-2006 Rev 1 Page: 7 of 7 Prepared by: Grace Shen |
Price & Availability of 7343B1C21-APSBPMS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |